湖南大學

湖南大學土木工程學院碩士研究生導師介紹：趙華 

一、基本信息

性別：男

民族：漢

籍貫：中國，湖北省松滋市

職稱：教授

出生年月：1975年3月

工作單位：湖南大學土木工程學院

聯系地址：湖南省長沙市岳麓山，410082

辦公電話：0731-8822221

電子郵件： zhmit@hotmail.com
 
二、研究方向

（1）新型橋梁動態稱重系統的研發及應用研究;

（2）既有橋梁現狀評估及維護管理；

（3）動力反問題；

（4）結構健康監測。
 
三、學習背景

（1）1992.09－1996.07，湖南大學土木工程學院交通土建專業學習，獲學士學位；

（2）1996.09－1999.07，湖南大學土木工程學院橋梁工程專業學習，獲碩士學位；

（3）2006.08－2010.05，University of Alabama at Birmingham, USA, 獲博士學位；
 
三、主要工作經歷

（1）1999.07－2004.10，湖南大學土木工程學院橋梁教研室  講師；

（2）2004.10－2006.03，日本琉球大學土木工程系研究助理；

（3）2010.06－至今，湖南大學土木工程學院橋梁教研室  講師；

（4）2011.09－2011.12，Research Associate at University of Alabama at Birmingham, USA；

（5）2012.07－2012.12， Research Associate at University of Alabama at Birmingham, USA

 四、目前主持的科研項目

 此外，作為中方代表，承擔了美國美國國家自然科學基金(Developing Bridge Weigh-in-Motion (B-WIM) Health Monitoring Systems for Bridge Infrastructure Safety) (2011年-2015年)。
 
五、學術論文
 
1.Zhao, H., and Uddin,N., “Innovative bridge weigh-in-motion system for enforcement application”, IABSE-IASS Symposium London 2011, London, pp. 581

2.Zhao, H., and Uddin,N., “Influence line calculation of existing bridges in BWIM system”, IABSE-IASS Symposium London 2011, London, pp. 572

3.Zhao, H., Uddin, N., Waldron, C.J., and O’BRIEN, E.J., “Use of Weigh-In-Motion (WIM) Data for Site-Specific LRFR Bridge Rating”, International ConferenceonWeigh-In-Motion, ICWIM 6, Dallas, Texas, June 4 - 7, 2012

4.Shao, X.D., Jiang, W., Hu, J.H., Zhao, H., and Lu, L.Z., “Hyperbolic tower of a multi-span cable-stayed bridge”, IABSE-IASS Symposium London 2011, London, pp. 276

5.Shao, X.D., Yi, D.T., Huang, Z.Y., Zhao, H., Chen, B., and Liu, M.L, “The Basic Performance of the Composite Deck System Composed of Orthotropic Steel Deck and Ultra-thin RPC Layer ”, ASCE, Journal of Bridge Engineering, (corresponding author)(accepted for publication in Nov, 2011)

6.Zhao, H., and Uddin,N., “Algorithm to identify axle weights for an innovative BWIM system- Part I”, Advances in Bridge Engineering-II, 8-10 August, 2010, Dhaka, Bangladesh, pp.527-536

7.Zhao, H., and Uddin,N., “Algorithm to identify axle weights for an innovative BWIM system- Part II”, Advances in Bridge Engineering-II, 8-10 August, 2010, Dhaka, Bangladesh, pp.537-546

8.Shao, X.D., Wang, H.L., Zhao, H. and Chang, Y., “Experimental study on multi-cantilever prestressed composite beams with corrugated steel webs”, ASCE, J. of Structural Eng., , Vol. 136, No. 9, September 2010, pp. 1098-1110

9.Shao, X.D., Yang, J.J., Zhao, H., Zhou, Y.D., and Nie, M.C., “Experimental Research on and Application of Twice-Prestressed Concrete Beam”, Advances in Structural Engineering, Vol. 13, No. 2, April 2010, pp. 321-330

10.Zhao, H., Uddin, N., Hitchcock, W.A., Salama, T. and Abd-El-Meguid, A.S., “Bridge repair and maintenance with bridge weight-in-motion: A case study with bridge on highway I-459”, Structural Faults & Repair-2008, June 2008, Edinburgh, Edinburgh, UK

11.Zhao, H., Uddin, N., Hitchcock, W.A., Salama, T. and Abd-El-Meguid, A.S., “Innovative bridge weigh-in-motion system for bridge maintenance: A case study with bridge on highway I-59” 10th International Bridge and Structure Management Conference, Buffalo, New York, Transportation Research Board, October 2008, pp. 369-383

12.Shao, X.D., Zhao, H., Li, L.F., Peng, W.H., Liu, G.D. and Yan, B.F., “Design and experimental study of a harp shaped single span cable-stayed bridge”, ASCE, Journal of Bridge Engineering, Vol.10, No.6, Nov. 2005, pp.658-665

13.Yamakawa, T. and Zhao, H., “Experimental and analytical investigation of seismic retrofit for RC framed shear walls by hybrid techniques”, ASCCS, China, pp.811-817, Aug, 2006

14.Zhao, H. and Yamakawa, T., “Cyclic loading test on retrofitted RC framed shear walls”, AIJ Kyushu Chapter Architectural Research Meeting (Structure), Fukoka, Japan, pp.361-364, Mar, 2006

15.Zhao, H.,Shao, X.D., Qin, J.J., Li, L.F. and Peng, W.H., “The Design and experimental study of the steel-concrete composite box girder of a harp-shaped single span cable-stayed bridge”, the fourth Inter. Conf. on Advances in Steel Structures, Shanghai, China, June 2005, pp1633-1638

16.Zhao, H., Shao, X.D., Liu, G.D., Chen, M.X. and Zhu, P., “Analysis of ultimate load bearing capacity of reinforced concrete arch bridges”, IABSE, Shanghai, China, Sept. 2004, (paper No. SHA103)

17.邵旭東, 李立峰, 趙華, “長沙洪山橋豎琴斜拉橋的設計”, 湖南大學學報（自然科學版） 2001年第28卷第4期, pp.88-93

18.李立峰, 邵旭東, 趙華, “長沙湘江南大橋V形腿設計與分析”, 公路, 2002年第11期pp.32-36

19.  趙華，“鋼管混凝土拱結構極限承載力分析”, 中國公路, 2001年11月, pp.174-183
 
 六、參編著作

1.《橋梁設計百問》，邵旭東編著，參編6萬字，人民交通出版社，2003

2.《橋梁工程》，邵旭東主編，參編23萬字，人民交通出版社，2005

3.《橋梁工程》，邵旭東主編，參編16萬字，武漢工業大學出版社，2005

4.《專業英語（公路與城市道路工程）》，李嘉主編，參編5萬字，人民交通出版社，2003