武漢理工大學

一、姓名：錢東升

二、基本情況：

1、出生年月：1982年7月

2、學 位：博士

3、職 稱：副教授

4、工作院系：材料學院材料成型加工系

三、教育經歷(從大學開始)：

1998.09-2002.07: 武漢理工大學，機械設計與制造，學士

2002.09-2006.07: 武漢理工大學，材料加工工程，碩士

2006.09-2009.06: 武漢理工大學，材料加工工程，博士

2016.03-2017.02: 英國諾丁漢大學，工程學部，訪問學者

四、工作經歷：

2009.07-2011.09: 武漢理工大學，材料學院材料成型加工系，講師

2011.10-至今: 武漢理工大學，材料學院材料成型加工系，副教授

2009.12-2012.10: 天馬軸承集團股份有限公司，博士后

五、研究領域(不多于3個)：

1、高性能軸承成形制造理論與技術

2、特種裝備環類零件精密軋制成形理論與技術

六、科研項目(不多于5項)：

1、厚壁深槽環件復合軋制成形機理與技術基礎研究(國家自然科學基金,主持)

2、高速機床主軸軸承精度損失溯源研究(國家自然科學基金，主持)

3、大型風電軸承環件精確軋制成形建模仿真與工藝控制研究(中國博士后科學基金，主持)

4、高性能汽車軸承精鍛精軋控型控性關鍵技術研發與應用(湖北省重大科技創新計劃，主持)

5、高性能油氣管道閥門零件復合軋制先進技術與裝備研發(江蘇省重點研發計劃，主持)

七、代表性論文及著作(不多于10項)：

[1] 錢東升. 異形截面環件冷軋力學原理和工藝理論研究. 武漢: 武漢理工大學出版社, 2012

[2] Guo Jun, Qian Dongsheng*.Grain refinement limit during hot radial ring rolling of as-cast GCr15steel. Journal of Materials Processing Technology, 2016, 231:151-161(JCR-Q1)

[3] Hua Lin, Deng Jiadong, Qian Dongsheng*, Lan Jan, Long Hui. Modeling and application of ring stiffness condition for radial-axial ring rolling. International Journal of Machine Tools & Manufacture, 2016,110: 69-79(JCR-Q1)

[4] Qian Dongsheng, Zhang Zhiqiang, Hua Lin*. An advanced manufacturing method for thick-wall and deep-groove ring-Combined ring rolling. Journal of Materials Processing Technology, 2013, 213(8):1258-1267(JCR-Q1)

[5] Qian Dongsheng, Hua Lin*, Pan Libo. Research on gripping conditions in profile ring rolling of raceway groove. Journal of Materials Processing Technology, 2009, 209(6):2794-2802 (JCR-Q1)

[6] Qian Dongsheng, Hua Lin*, Zuo Zhijiang. Investigation of distribution of plastic zone in the process of plastic penetration. Journal of Materials Processing Technology, 2007, 187:734-737(JCR-Q1)

八、聯系方式：

1、Tel： 027-87168391

2、E-mail：qiands@whut.edu.cn

3、工作地址(實驗室)：武漢理工大學馬房山校區西院材料大樓407室

英文版簡介

1. Name: Qian Dongsheng

2. Basic Information

1) Birth: 3 July 1982

2) Degree: Ph.D

3) Title: Associate Professor

4) School: School of Materials Science and Enginnering, Department of

Materials Processing

3. Education

1998.9-2002.7: B.S., in Material Processing Engineering, Wuhan University of

Technology

2002.9-2006.7: M.E., in Material Processing Engineering, Wuhan University of Technology

2006.9-2009.6: Ph.D. in Material Processing Engineering, Wuhan University of Technology

2016.3-2017.2: Academic Visitor, the University of Nottingham, Faculty of Engineering

4. Work Experience

2009.7-2011.9: Wuhan University of Technology, School of Materials Science and

Enginnering, Department of Materials Processing, Lecturer

2011.10-Present: Wuhan University of Technology, School of Materials Science and

Enginnering, Department of Materials Processing, Associate

Professor

2009.12-2012.10: Tianma Bearing Group Co, Ltd., Posterdoctor

5. Research Interests (no more than 3 items)

(1) Forming manufacturing theory and technique for high-performance bearings

(2) Precision rolling theory and technique for ring components of special equipments

6. Project Experience (no more than 5 items)

(1) Fundamental Research on Forming Mechanism and Technique for Combined Ring Rolling of Thick-wall and Deep-groove (National Natural Science Foundation of China, Project Leader)

(2) Research on Origin Tracing for Precision Loss of Main Shaft Bearing in High-speed Machine Tool (National Natural Science Foundation of China, Project Leader)

(3) Research on Precise Forming Simulation and Technology Control of Large Wind

Power Bearing Ring (China Postdoctoral Science Foundation, Project Leader)

(4) Research and Application on Key Technique of Shape and Property Control for Precision Forging and Rolling of High-performance Automotive Bearing (Important Science and Technology Innovation Program of Hubei province, Project Leader)

(5) Research and Development on Advanced Combined Rolling Technique and Equipment for High-performance Valve Components of Pipeline ( Primary Research & Development Plan of Jiangsu Province, Project Leader)

7. Publications (no more than 10 items)

[1] Qian Dongsheng. Research on Mechanical Principle and Technological Theory for Profile Ring Rolling( in Chinese ) Wuhan: Wuhan University of Technology Press, 2012

[2] Guo Jun, Qian Dongsheng*.Grain refinement limit during hot radial ring rolling of as-cast GCr15steel. Journal of Materials Processing Technology, 2016, 231:151-161(JCR-Q1)

[3] Hua Lin, Deng Jiadong, Qian Dongsheng*, Lan Jan, Long Hui. Modeling and application of ring stiffness condition for radial-axial ring rolling. International Journal of Machine Tools & Manufacture, 2016,110: 69-79(JCR-Q1)

[4] Qian Dongsheng, Zhang Zhiqiang, Hua Lin*. An advanced manufacturing method for thick-wall and deep-groove ring-Combined ring rolling. Journal of Materials Processing Technology, 2013, 213(8):1258-1267(JCR-Q1)

[5] Qian Dongsheng, Hua Lin*, Pan Libo. Research on gripping conditions in profile ring rolling of raceway groove. Journal of Materials Processing Technology, 2009, 209(6):2794-2802 (JCR-Q1)

[6] Qian Dongsheng, Hua Lin*, Zuo Zhijiang. Investigation of distribution of plastic zone in the process of plastic penetration. Journal of Materials Processing Technology, 2007, 187:734-737(JCR-Q1)

8. Contact information

1) Tel:  +86-(0)27-87168391

2) Email: qiands@whut.edu.cn

3) Address: 407 Room, Material Building, West Campus, Wuhan University of

Technology