武漢理工大學

2025/2026考研輔導網課

中國考研網 考研網 » 院校信息 » 武漢理工大學 » 研究生導師介紹

武漢理工大學材料科學與工程學院研究生導師：肖勇

分類：導師信息來源：武漢理工大學材料科學與工程學院 2019-07-30　相關院校：武漢理工大學

2025考研數學全程班早鳥3班

26考研全科上岸規劃營「擇校▪規劃▪備考」

武漢理工大學2025考研專業課復習資料「真題▪筆記▪講義▪題庫」

一、姓名：肖勇

二、基本情況：

1、出生年月：1985年1月

2、學 位：博士學位

3、職稱：副教授

4、工作院系：材料科學與工程學院材料成型與加工工程系

三、教育經歷(從大學開始)：

2010/09-2014/07，哈爾濱工業大學，材料加工工程專業，博士

2008/09-2010/07，哈爾濱工業大學，材料加工工程專業，碩士

2004/09-2008/07，三峽大學，材料成型及控制工程專業，學士

四、工作經歷：

2016/09-目前，武漢理工大學，材料學院，副教授、碩士生導師

2015/10-2016/09，武漢理工大學，材料學院，講師、碩士生導師

2014/10-2015/10，武漢理工大學，材料學院，講師

五、研究方向：

釬焊材料及技術、特種連接技術

六、在研項目(不多于5項)：

[1] 超聲輔助低溫釬焊超細晶Al合金接頭連接機理研究，國家自然科學基金/青年基金(51605357)，2017.01-2019.12，主持。

[2] 基于泡沫Ni/Sn復合釬料的超細晶Al合金低溫釬焊工藝及連接機理研究，湖北省自然科學基金/青年基金(2016CFB335)，2016.01-2017.12，主持。

[3] 無鉛焊料可靠性能評價研究，企業委托，2017.01-2019.01，項目負責人。

[4] 感應線圈導磁體及其對加熱的影響機理研究，企業委托(20171h0420)，2017.12-2018.10，項目負責人。

[5] 紫/青/黃銅管材半自動釬焊工藝研究，企業委托，2017.10-2018.03，項目負責人。

七、代表性論文及著作(不多于10項)：

Yong Xiao, Qiwei Wang, Ziqi Wang, Xian Zeng*, Mingyu Li, Ling Wang, Xiaomeng Zhu. Ultrasonic soldering of Cu alloy using Ni-foam/Sn composite interlayer, Ultrasonics Sonochemistry, 2018, Accept. (SCI, IF=4.218)

Xingyi Zhang, Yong Xiao*, Ling Wang, Chao Wan, Qiwei Wang, Hongchao Sheng, Mingyu Li. Ultrasound-induced liquid/solid interfacial reaction between Zn-3Al alloy and Zr-based bulk metallic glasses, Ultrasonics Sonochemistry, 2018, Accept. (SCI, IF=4.218)

Yong Xiao, Yuanqi Zhang, Kai Zhao, Shan Li, Ling Wang, Jue Xiao, Li Liu*, Ultrasound-assisted soldering of alumina using Ni-foam reinforced Sn-based composite solders, Ceramics International, 2017, 43(16): 14314-14320. (SCI, IF=2.758)

Dan Luo, Yong Xiao*, Ling Wang, Li Liu, Xian Zeng, Mingyu Li. Interfacial reaction behavior and bonding mechanism between liquid Sn and ZrO2 ceramic exposed in ultrasonic waves, Ceramics International, 2017, 43(10): 7531-7536. (SCI, IF=2.758)

Yong Xiao, Mingyu Li*, Ling Wang, Shangyu Huang, Xueming Du, Zhiquan Liu*. Interfacial reaction behavior and mechanical properties of ultrasonically brazed Cu/Zn-Al/Cu joints. Materials & Design, 2015,73:42-49. (SCI, IF=3.501)

Yong Xiao, Hongjun Ji, Mingyu Li*, Jongmyung Kim. Ultrasound-induced equiaxial flower-like CuZn5/Al composite microstructure formation in Al/Zn-Al/Cu joint. Materials Science and Engineering A, 2014, 594:135-139. (SCI, IF=2.567)

Yong Xiao, Hongjun Ji, Mingyu Li*, Jongmyung Kim, Hongbae Kim. Microstructure and joint properties of ultrasonically brazed Al alloy joints using a Zn-Al hypereutectic filler metal. Materials & Design, 2013, 47:717–724. (SCI, IF=3.501)

Yong Xiao, Hongjun Ji, Mingyu Li*, Jongmyung Kim. Ultrasound-assisted brazing of Cu/Al dissimilar metals using a Zn-3Al filler metal. Materials & Design, 2013, 52:740-747. (SCI, IF=3.501)

Yu Lei, Shangyu Huang, Wei Liu*, Yong Xiao, Jianhua Hu, Xueming Du, Xifan Zou. Dissimilar Cu/Al tube joint by EMF-assisted brazing. The International Journal of Advanced Manufacturing Technology, 2018,1:1-9. (SCI)

Qiwei Wang, Yong Xiao*, Xingyi Zhang, Ultrasound-assisted soldering of Cu alloy using a Ni-foam reinforced Sn composite solder, ICEPT,2017, 18th. (EI)

八、聯系方式：

1、Tel:

2、E-mail: yongxiao@whut.edu.cn

3、工作地址(實驗室)：馬房山校區東院成型系辦公樓(紅房子)104室

1. Name: Yong Xiao

2. Brief introduction:

1) Date of birth: 1985-01-

2) Degree: Ph.D

3) Title: Associate Professor

4) Working department:

Department of Material shaping and Processing Engineering, School of Materials Science and Engineering

3. Education experience (after entering university):

2010/09-2014/07, Harbin Institute of Technology, Material Processing Engineering, Doctor degree.

2008/09-2010/07, Harbin Institute of Technology, Material Processing Engineering, Master degree.

2004/09-2008/07, China Three Gorges University, Material Shaping and Control Engineering, Bachelor degree.

4. Working experience:

2014/10-2016/09, School of Materials Science and Engineering, Wuhan University of Technology, Associate Professor.

2014/10-2016/09, School of Materials Science and Engineering, Wuhan University of Technology, Assistant Professor.

5. Research field (no more than 3):

1) Brazing materials and technology

2) Special materials joining technology

6. Research project (no more than 5):

[1] Study on the bonding mechanism of ultrasound-assisted low-temperature soldering of ultrafine grained Al alloy, National Nature Science Foundation of China (No. 51605357), 2017.01-2019.12. (P.I.)

[2] Study on the metallurgic bonding mechanism between Ni-foam/Sn liquid/solid composite solders and Al substrates, Nature Science Foundation of Hubei Province (2016CFB335), 2016.01-2017.12. (P.I.)

[3] Study on the reliability of Pb-free solder, Enterprise Research Project (20151h0275), 2017.01-2019.01. (P.I.)

[4] Study on the induction coil magnet and its heating mechanism, Enterprise Research Project (20151h0275), 2017.12-2018.10. (P.I.)

[5] High-speed brazing of thick wall copper/brass/bronze dissimilar tubes, Enterprise Research Project (20171h0420), 2017.10-2018.03. (P.I.)

7. Representative papers and works (no more than 10)：

Yong Xiao, Hongjun Ji, Mingyu Li*, Jongmyung Kim. Ultrasound-assisted brazing of Cu/Al dissimilar metals using a Zn-3Al filler metal. Materials & Design, 2013, 52:740-747. (SCI, IF=3.501)

Qiwei Wang, Yong Xiao*, Xingyi Zhang, Ultrasound-assisted soldering of Cu alloy using a Ni-foam reinforced Sn composite solder, ICEPT,2017, 18th. (EI)

8. Contact information：

1) Tel：

2) E-mail：yongxiao@whut.edu.cn

3) Location of office： Room 104, The red house in Eastern Campus.